PartsTable
Technical Data Sheet
PartsTable / MRO / 250047
250047 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, cup_width: 0.7411 INCHES NOMINAL IN, body_style: STRAIGHT EDGE TYPE W/MOUNTING FLANGE, cone_width: 0.8661 INCHES NOMINAL IN, bore_diameter: 2.5000 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3898, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 250047
NSN: 3110-00-100-3898
FSC: 3110
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.7411 INCHES NOMINAL IN
body_styleSTRAIGHT EDGE TYPE W/MOUNTING FLANGE
cone_width0.8661 INCHES NOMINAL IN
bore_diameter2.5000 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG SINGLE MATING END SINGLE CONTACT GROUPING
overall_height0.656 INCHES NOMINAL IN
overall_length4.925 INCHES NOMINAL IN
standout_width0.1250 INCHES NOMINAL IN
insert_materialPLASTIC DIALLYL PHTHALATE SINGLE MATING END
style_designatorSTRAIGHT BORE, NORMAL ANGLE
NSN3110-00-100-3898
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 250047 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 2.5000 INCHES NOMINAL IN
•
CONE WIDTH: 0.8661 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STANDOUT WIDTH: 0.1250 INCHES NOMINAL IN
•
CUP WIDTH: 0.7411 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0460 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER2.5000 INCHES NOMINAL IN
CONE WIDTH0.8661 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STANDOUT WIDTH0.1250 INCHES NOMINAL IN
CUP WIDTH0.7411 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0460 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER4.3307 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
207MInterchangeable
interchangeable cross-reference
interchangeable
SA2296-310Interchangeable
interchangeable cross-reference
interchangeable
32073PC21Interchangeable
interchangeable cross-reference
interchangeable
32074PC23Interchangeable
interchangeable cross-reference
interchangeable
35013ITEM10Interchangeable
interchangeable cross-reference
interchangeable
250047Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 250047?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 250047?
250047 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 250047?
There are 14 known substitutes for 250047: 207M, SA2296-310, 32073PC21 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 250047?
250047 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3898. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 250047

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026