PartsTable
Technical Data Sheet
Download PDF

2500-19 — VALVE,SOLENOID

✓ Government record, cited
Equip · ORING SEAL
PRODUCT OVERVIEW

2500-19: VALVE,SOLENOID.

Equip BI‐DI serial transceivers are designed for single mode fiber with cost effective and high performance by using 1310nm transmitter and 1550 receiver or 1550nm transmitter and 1310nm receiver. Key specifications include special_features: 3-WAY VALVE, valve_operation_method: SOLENOID, end_item_identification: SULLAIR CORP COMPRESSOR MODEL NO. H750/300, specification/standard_data: 32101-2500-19 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION, voltage_in_volts_and_current_type: 24.0 AC, flow_control_device_normal_operation_position: OPEN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-917-4649, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2500-19
NSN: 5340-00-917-4649
NIINs: 009174649, 011126367, 013308119, 013368043
FSC: 5340 — Hardware, Commercial
CAGE: 93568 — HARSCO CORP BMY-COMBAT SYSTEMS DIV (USA)
SPECIFICATIONS
special_features3-WAY VALVE
valve_operation_methodSOLENOID
end_item_identificationSULLAIR CORP COMPRESSOR MODEL NO. H750/300
specification/standard_data32101-2500-19 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
voltage_in_volts_and_current_type24.0 AC
flow_control_device_normal_operation_positionOPEN
NSN5340-00-917-4649
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2500-19 MFR: Equip ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: PRESS FIT
•
STYLE DESIGNATOR: CYLINDRICAL
•
OUTSIDE DIAMETER: 1.375 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
GRIPPING SURFACE CONDITION: GRIP AID
•
MATERIAL: PLASTIC OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING METHODPRESS FIT
STYLE DESIGNATORCYLINDRICAL
OVERALL LENGTH5.000 INCHES NOMINAL IN
OUTSIDE DIAMETER1.375 INCHES NOMINAL IN
INSIDE DIAMETER0.625 INCHES NOMINAL IN
GRIPPING SURFACE CONDITIONGRIP AID
MATERIALPLASTIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
SB2R10-50Reference document
Same NSN cross-reference
Reference document — Secondary reference
00025-0019Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 2500-19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2500-19?
2500-19 is a VALVE,SOLENOID manufactured by Equip.
What parts can replace 2500-19?
There are 2 known substitutes for 2500-19: SB2R10-50, 00025-0019. Substitute compatibility should be verified for your specific system.
What is the NSN for 2500-19?
2500-19 is cataloged in the U.S. Government catalog under NSN 5340-00-917-4649. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2500-19