24SX-2-6-3-L — 24SX-2-6-3-L

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

24SX-2-6-3-L: 24SX-2-6-3-L.

The 24SX-2-6-3-L is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, body_style: SCREW WEDGE, overall_width: 2.180 INCHES NOMINAL IN, overall_height: 0.287 INCHES NOMINAL IN, overall_length: 3.000 INCHES NOMINAL IN, special_features: HOLDS CARD 0.062 IN. THICK IN.

This part is cataloged in the U.S. Government catalog under NSN 5998-01-093-9482, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 24SX-2-6-3-L

NSN: 5998-01-093-9482
NIINs: 010939482, 012986725
FSC: 5998 — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
CAGE: 61081 — SCHROFF INC (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING
body_style	SCREW WEDGE
overall_width	2.180 INCHES NOMINAL IN
overall_height	0.287 INCHES NOMINAL IN
overall_length	3.000 INCHES NOMINAL IN
special_features	HOLDS CARD 0.062 IN. THICK IN
features_provided	LEFT HAND LOCK
surface_treatment	CADMIUM
unthreaded_mounting_hole_diameter	0.067 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
mounting_facility_type_and_quantity	2 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
material_document_and_classification	ASTM A 109 ASSN STD SINGLE MATERIAL RESPONSE
surface_treatment_document_and_classification	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
NSN	5998-01-093-9482

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING FACILITY TYPE AND QUANTITY: 3 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE

•

BODY STYLE: SCREW WEDGE

•

UNTHREADED MOUNTING HOLE DIAMETER: 0.062 INCHES NOMINAL SINGLE MOUNTING FACILITY IN

•

SURFACE TREATMENT: CHROMATE

TECHNICAL CHARACTERISTICS

MOUNTING FACILITY TYPE AND QUANTITY	3 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
OVERALL HEIGHT	0.215 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE
BODY STYLE	SCREW WEDGE
UNTHREADED MOUNTING HOLE DIAMETER	0.062 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
OVERALL LENGTH	3.000 INCHES NOMINAL IN
OVERALL WIDTH	0.295 INCHES NOMINAL IN
SURFACE TREATMENT	CHROMATE
MATERIAL	STEEL

SUBSTITUTES & CROSS-REFERENCES 5

CG19-03Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

401-7032-013Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

46-061650-01Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

900646-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

6181685-005Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 24SX-2-6-3-L?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 24SX-2-6-3-L?

24SX-2-6-3-L is a 24SX-2-6-3-L. It is classified as a MRO (MRO_GENERAL).

What parts can replace 24SX-2-6-3-L?

There are 5 known substitutes for 24SX-2-6-3-L: CG19-03, 401-7032-013, 46-061650-01 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 24SX-2-6-3-L?

24SX-2-6-3-L is cataloged in the U.S. Government catalog under NSN 5998-01-093-9482. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

24SX-2-6-3-L — 24SX-2-6-3-L

Request a Quote — 24SX-2-6-3-L