PartsTable
Technical Data Sheet
PartsTable / MRO / 24L12
24L12 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SWITCH,CODE INDICATING WHEEL is a the manufacturer industrial component. Key specifications include color: BLACK SINGLE BODY, length: 5.650 INCHES NOMINAL OVERALL IN, thread_class: 2B SINGLE MOUNTING FACILITY, actuator_type: TOGGLE SINGLE ACTUATOR, overall_width: 1.610 INCHES NOMINAL IN, terminal_type: PRINTED CIRCUIT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-677-3102, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 24L12
NSN: 5340-00-677-3102
FSC: 5340
CAGE: 71286 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV CAMLOC PRODUCTS (USA)
SPECIFICATIONS
colorBLACK SINGLE BODY
length5.650 INCHES NOMINAL OVERALL IN
thread_class2B SINGLE MOUNTING FACILITY
actuator_typeTOGGLE SINGLE ACTUATOR
overall_width1.610 INCHES NOMINAL IN
terminal_typePRINTED CIRCUIT
overall_height1.631 INCHES NOMINAL IN
overall_length0.480 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S) SINGLE MOUNTING FACILITY
special_features55.000 IN. C.R. IN
style_designatorRECTANGULAR INDICATING
features_providedILLUMINATED AND RFI SHIELDING
NSN5340-00-677-3102
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24L12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 5.650 INCHES NOMINAL OVERALL IN
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH5.650 INCHES NOMINAL OVERALL IN
SPECIAL FEATURES55.000 IN. C.R. IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
SA9439W1T1917Upgraded Successor
successor cross-reference
successor
H282Upgraded Successor
successor cross-reference
successor
858143-0001Interchangeable
interchangeable cross-reference
interchangeable
M22710/24-024Interchangeable
interchangeable cross-reference
interchangeable
24L12Interchangeable
interchangeable cross-reference
interchangeable
M27/197-11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24L12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24L12?
24L12 is a SWITCH,CODE INDICATING WHEEL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 24L12?
There are 6 known substitutes for 24L12: SA9439W1T1917, H282, 858143-0001 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 24L12?
24L12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-677-3102. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24L12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026