PartsTable
Technical Data Sheet
Download PDF

24984-2 — PAD,CUSHIONING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

24984-2: PAD,CUSHIONING.

The PAD,CUSHIONING is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 4.000 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR CUSHIONING, thickness: 0.250 INCHES NOMINAL IN, special_features: MATERIAL CLASSIFICATION CODE IS SAE-AMS-R-6855; END ITEM IS MK104 CRADLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-508-6914, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24984-2
NSN: 5340-01-508-6914
FSC: 5340 — Hardware, Commercial
CAGE: 07070 — UNITED STATES DEPARTMENT OF THE NAVY DBA NAVAL SURFACE WARFARE CENTER PANAMA CITY (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length4.000 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR CUSHIONING
thickness0.250 INCHES NOMINAL IN
special_featuresMATERIAL CLASSIFICATION CODE IS SAE-AMS-R-6855; END ITEM IS MK104 CRADLE
NSN5340-01-508-6914
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24984-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 4.000 INCHES NOMINAL IN
•
WIDTH: 1.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHIONING
•
THICKNESS: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH4.000 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL CLASSIFICATION CODE IS SAE-AMS-R-6855; END ITEM IS MK104 CRADLE
WIDTH1.000 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHIONING
THICKNESS0.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
24984 PC 13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
24984Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 24984-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24984-2?
24984-2 is a PAD,CUSHIONING.
What parts can replace 24984-2?
There are 2 known substitutes for 24984-2: 24984 PC 13, 24984. Substitute compatibility should be verified for your specific system.
What is the NSN for 24984-2?
24984-2 is cataloged in the U.S. Government catalog under NSN 5340-01-508-6914. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24984-2