PartsTable
Technical Data Sheet
Download PDF

249470 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

249470: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include strength: 0.2 PERCENT 3,5-DIMETHYL-4-CHLOROPHENOL ACTIVE INGREDIENT, usage_design: FRESH WATER, physical_form: LIQUID, lanolin_feature: NOT INCLUDED, special_features: 9 BOTTLES PER CASE, abrasive_additive: NOT INCLUDED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-157-9656, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
249470
NSN: 5340-00-157-9656
NIINs: 001579656, 013028316
FSC: 5340 — Hardware, Commercial
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
strength0.2 PERCENT 3,5-DIMETHYL-4-CHLOROPHENOL ACTIVE INGREDIENT
usage_designFRESH WATER
physical_formLIQUID
lanolin_featureNOT INCLUDED
special_features9 BOTTLES PER CASE
abrasive_additiveNOT INCLUDED
supply_package_typePACKAGE
ingredient_classificationMEDICATED
quantity_within_each_unit_package2500.000 MILLILITERS
NSN5340-00-157-9656
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 249470 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.504 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 1.125 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
SURFACE TREATMENT: PAINT OVERALL
•
WIDTH: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
LENGTH1.504 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION1.125 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
SURFACE TREATMENTPAINT OVERALL
WIDTH0.750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
481263PC7REVB1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 249470?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 249470?
249470 is a CLIP,SPRING TENSION.
What parts can replace 249470?
There is 1 known substitute for 249470: 481263PC7REVB1. Substitute compatibility should be verified for your specific system.
What is the NSN for 249470?
249470 is cataloged in the U.S. Government catalog under NSN 5340-00-157-9656. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 249470

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.