PartsTable
Technical Data Sheet
Download PDF

24945 — TUBE ASSEMBLY,METAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

24945: TUBE ASSEMBLY,METAL.

The TUBE ASSEMBLY,METAL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, fork_depth: 0.560 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN, shank_length: 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN, thread_class: 2A ROD CONNECTION A, hole_diameter: 0.187 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN, overall_width: 0.520 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-209-3606, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24945
NSN: 5340-00-209-3606
NIINs: 002093606, 011830479
FSC: 5340 — Hardware, Commercial
CAGE: 78710 — TRIUMPH CONTROLS, LLC DBA TRIUMPH CONTROLS, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
fork_depth0.560 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
shank_length0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
thread_class2A ROD CONNECTION A
hole_diameter0.187 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN
overall_width0.520 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
thread_length0.500 INCHES NOMINAL ROD CONNECTION IN
overall_height0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
shank_diameter0.375 INCHES NOMINAL IN
fork_span_width0.285 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
NSN5340-00-209-3606
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24945 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.375 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.285 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.120 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END: 0.290 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.500 INCHES NOMINAL ROD CONNECTION IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.375 INCHES NOMINAL IN
OVERALL HEIGHT0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM IN
FORK SPAN WIDTH0.285 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
FORK ARM THICKNESS0.120 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END0.290 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
THREAD LENGTH0.500 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
STYLE DESIGNATORCLEVIS
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 24945?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24945?
24945 is a TUBE ASSEMBLY,METAL.
What is the NSN for 24945?
24945 is cataloged in the U.S. Government catalog under NSN 5340-00-209-3606. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24945

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.