PartsTable
Technical Data Sheet
PartsTable / O-RING / 24904
24904 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, special_features: CABLE, DISPLAY PORT, 6FT - 4K 30HZ FT, surface_treatment: CADMIUM CASE, housing_bore_diameter: 3.2495 INCHES MINIMUM AND 3.2525 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-263-5090, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24904
NSN: 5331-00-263-5090
FSC: 5331 — O-RING
CAGE: 82796 — COLTEC INDUSTRIES INC. DBA FAIRBANKS MORSE ENGINE DIV FAIRBANKS MORSE ENGINE (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
special_featuresCABLE, DISPLAY PORT, 6FT - 4K 30HZ FT
surface_treatmentCADMIUM CASE
housing_bore_diameter3.2495 INCHES MINIMUM AND 3.2525 INCHES MAXIMUM IN
sealing_element_styleANGULAR
cross-sectional_height0.094 INCHES NOMINAL IN
accommodated_shaft_diameter2.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5331-00-263-5090
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24904 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 0.09375 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT0.09375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
410519SSRInterchangeable
interchangeable cross-reference
interchangeable
M2621AInterchangeable
interchangeable cross-reference
interchangeable
301-SN-935Interchangeable
interchangeable cross-reference
interchangeable
011273Interchangeable
interchangeable cross-reference
interchangeable
10A2473Interchangeable
interchangeable cross-reference
interchangeable
24903Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24904?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24904?
24904 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 24904?
There are 17 known substitutes for 24904: 410519SSR, M2621A, 301-SN-935 and 14 more. Substitute compatibility should be verified for your specific system.
Is 24904 still available?
24904 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24904

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026