PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 24874
24874 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include phase: THREE, material: STEEL COMP 303 BODY, nut_style: CAP, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, nut_height: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-221-4890, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24874
NSN: 5310-00-221-4890
FSC: 5310
CAGE: 32242 — JOHNSON CONTROLS, INC DIV BUILDING EFFICIENCY (USA)
SPECIFICATIONS
phaseTHREE
materialSTEEL COMP 303 BODY
nut_styleCAP
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
nut_height0.500 INCHES NOMINAL IN
teeth_typeSINGLE HELIX
design_typeREUSABLE
helix_angle6.6498 DEGREES
control_typeREMOTE
thread_class3B
body_diameter0.172 INCHES NOMINAL IN
NSN5310-00-221-4890
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 24874 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
THREAD QUANTITY PER INCH: 24
•
BEARING SURFACE TYPE: WASHER FACED
•
THREAD SERIES: UNF
•
MATERIAL: COPPER ALLOY 360 OVERALL
•
WIDTH ACROSS FLATS: 0.625 INCHES NOMINAL IN
•
NUT STYLE: CAP
•
NUT HEIGHT: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD SIZE0.375 INCHES IN
THREAD QUANTITY PER INCH24
BEARING SURFACE TYPEWASHER FACED
THREAD SERIESUNF
MATERIALCOPPER ALLOY 360 OVERALL
WIDTH ACROSS FLATS0.625 INCHES NOMINAL IN
NUT STYLECAP
NUT HEIGHT0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
24874Interchangeable
interchangeable cross-reference
interchangeable
27809Interchangeable
interchangeable cross-reference
interchangeable
4913-900041Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24874?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24874?
24874 is a RESISTOR,FIXED,WIRE WOUND.
What parts can replace 24874?
There are 3 known substitutes for 24874: 24874, 27809, 4913-900041. Substitute compatibility should be verified for your specific system.
What is the NSN for 24874?
24874 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-221-4890. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24874

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026