PartsTable
Technical Data Sheet
Download PDF

2482216 — VALVE,REDUCING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2482216: VALVE,REDUCING.

The VALVE,REDUCING is a the manufacturer industrial component. Key specifications include material: PLASTIC, overall_height: 0.273 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN, groove_diameter: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, style_designator: DOUBLE FLANGE, top_flange_width: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN, bottom_flange_width: 0.148 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-688-6967, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2482216
NSN: 5340-00-688-6967
NIINs: 006886967, 009031289
FSC: 5340 — Hardware, Commercial
CAGE: 99551 — GOODRICH CORPORATION DBA GOODRICH CORP (USA)
SPECIFICATIONS
materialPLASTIC
overall_height0.273 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN
groove_diameter0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
style_designatorDOUBLE FLANGE
top_flange_width0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
bottom_flange_width0.148 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN
bottom_flange_diameter0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
outside/top_flange_diameter0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
material_document_and_classificationAMS 3656 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-688-6967
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2482216 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOTTOM FLANGE DIAMETER: 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
•
OUTSIDE/TOP FLANGE DIAMETER: 0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
•
GROOVE DIAMETER: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: DOUBLE FLANGE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3656 ASSN STD SINGLE MATERIAL RESPONSE
•
BOTTOM FLANGE WIDTH: 0.148 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN
•
TOP FLANGE WIDTH: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
BOTTOM FLANGE DIAMETER0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
OVERALL HEIGHT0.273 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN
OUTSIDE/TOP FLANGE DIAMETER0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
GROOVE DIAMETER0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
STYLE DESIGNATORDOUBLE FLANGE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3656 ASSN STD SINGLE MATERIAL RESPONSE
BOTTOM FLANGE WIDTH0.148 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN
TOP FLANGE WIDTH0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
MATERIALPLASTIC
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2482216?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2482216?
2482216 is a VALVE,REDUCING.
What is the NSN for 2482216?
2482216 is cataloged in the U.S. Government catalog under NSN 5340-00-688-6967. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2482216

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.