PartsTable
Technical Data Sheet
Download PDF

24811 — SWITCH,ROTARY

✓ Government record, cited
Clementoni · MRO · MRO_GENERAL
PRODUCT OVERVIEW

24811: SWITCH,ROTARY.

The SWITCH,ROTARY is a Clementoni industrial component. Key specifications include material: PLASTIC, shaft_type: ROUND, FLATTED SINGLE ACTUATOR, design_type: SPUR ALL GEARS, flat_height: 0.094 INCHES NOMINAL SINGLE ACTUATOR IN, shaft_length: 0.399 INCHES NOMINAL SINGLE ACTUATOR IN, thread_class: 2A SINGLE MOUNTING FACILITY A. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-290-7241, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 24811
NSN: 5340-00-290-7241
NIINs: 002907241, 011238575, 012869751
FSC: 5340 — Hardware, Commercial
CAGE: 88818 — KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION (USA)
SPECIFICATIONS
materialPLASTIC
shaft_typeROUND, FLATTED SINGLE ACTUATOR
design_typeSPUR ALL GEARS
flat_height0.094 INCHES NOMINAL SINGLE ACTUATOR IN
shaft_length0.399 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
terminal_typePIN
thread_length0.187 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_length1.499 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL SINGLE ACTUATOR IN
mounting_methodTHREADED BUSHING SINGLE MOUNTING FACILITY
overall_diameter0.920 INCHES MAXIMUM IN
NSN5340-00-290-7241
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24811 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 2.067 INCHES NOMINAL IN
•
LENGTH UNDER SHOULDER: 1.000 INCHES NOMINAL IN
•
OPEN END INSIDE DIAMETER: 2.181 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER2.067 INCHES NOMINAL IN
LENGTH UNDER SHOULDER1.000 INCHES NOMINAL IN
OPEN END INSIDE DIAMETER2.181 INCHES NOMINAL IN
MATERIALPLASTIC
SUBSTITUTES & CROSS-REFERENCES 4
SIZE221Reference document
Same NSN cross-reference
Reference document — Secondary reference
MILC52078Reference document
Same NSN cross-reference
Reference document — Identification reference
819356-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
221Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 24811?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24811?
24811 is a SWITCH,ROTARY manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 24811?
There are 4 known substitutes for 24811: SIZE221, MILC52078, 819356-1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 24811?
24811 is cataloged in the U.S. Government catalog under NSN 5340-00-290-7241. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24811