PartsTable
Technical Data Sheet
Download PDF

247ASC0809-004 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

247ASC0809-004: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 430 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT COUNTERSUNK REVERSE KEYED, key_length: 0.065 INCHES MAXIMUM IN, nut_length: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, head_height: 0.065 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-717-5570, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
247ASC0809-004
NSN: 5310-00-717-5570
FSC: 5310 — Nuts and Washers
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 430 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT COUNTERSUNK REVERSE KEYED
key_length0.065 INCHES MAXIMUM IN
nut_length0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
head_height0.065 INCHES MAXIMUM IN
nut_diameter0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_class3B
head_diameter0.391 INCHES NOMINAL IN
thread_seriesUNF
shank_end_typeOPEN
thread_directionRIGHT-HAND
NSN5310-00-717-5570
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 247ASC0809-004 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.065 INCHES MAXIMUM IN
•
NUT LENGTH: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
HEAD COUNTERSINK ANGLE: 99.00 DEGREES MINIMUM AND 101.00 DEGREES MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423,FORM 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SHANK END TYPE: OPEN
•
HEAD STYLE: FLAT COUNTERSUNK REVERSE KEYED
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.065 INCHES MAXIMUM IN
NUT LENGTH0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
HEAD COUNTERSINK ANGLE99.00 DEGREES MINIMUM AND 101.00 DEGREES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423,FORM 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK END TYPEOPEN
HEAD STYLEFLAT COUNTERSUNK REVERSE KEYED
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 1
SS10K166Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 247ASC0809-004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 247ASC0809-004?
247ASC0809-004 is a NUT,PLAIN,BLIND RIVET.
What parts can replace 247ASC0809-004?
There is 1 known substitute for 247ASC0809-004: SS10K166. Substitute compatibility should be verified for your specific system.
What is the NSN for 247ASC0809-004?
247ASC0809-004 is cataloged in the U.S. Government catalog under NSN 5310-00-717-5570. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 247ASC0809-004

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.