PartsTable
Technical Data Sheet
Download PDF

247ASC0711-035 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

247ASC0711-035: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.557 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), pilot_diameter: 0.207 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-008-5366, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
247ASC0711-035
NSN: 5310-01-008-5366
FSC: 5310 — Nuts and Washers
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.557 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.207 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN
special_featuresBLIND THREADS
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.250 INCHES NOMINAL IN
nominal_thread_size0.112 INCHES IN
thread_quantity_per_inch40
NSN5310-01-008-5366
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 247ASC0711-035 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35,TY 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
PILOT DIAMETER: 0.207 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN
•
NUT HEIGHT: 0.557 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TY 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
PILOT DIAMETER0.207 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN
NUT HEIGHT0.557 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
SPECIAL FEATURESBLIND THREADS
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLECLINCH
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
44NBS-EXR-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 247ASC0711-035?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 247ASC0711-035?
247ASC0711-035 is a NUT,PLAIN,CLINCH.
What parts can replace 247ASC0711-035?
There is 1 known substitute for 247ASC0711-035: 44NBS-EXR-18. Substitute compatibility should be verified for your specific system.
What is the NSN for 247ASC0711-035?
247ASC0711-035 is cataloged in the U.S. Government catalog under NSN 5310-01-008-5366. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 247ASC0711-035

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.