247ASC0650-013 — 247ASC0650-013

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

247ASC0650-013: 247ASC0650-013.

The 247ASC0650-013 is a the manufacturer industrial component. Key specifications include hole_diameter: 0.147 INCHES NOMINAL IN, overall_width: 1.750 INCHES NOMINAL IN, overall_length: 1.750 INCHES NOMINAL IN, aperture_diameter: 1.531 INCHES NOMINAL IN, precious_material: SILVER, outside_corner_radius: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5999-00-603-7458, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 247ASC0650-013

NSN: 5999-00-603-7458
FSC: 5999 — Miscellaneous Electrical and Electronic Components
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)

SPECIFICATIONS

hole_diameter	0.147 INCHES NOMINAL IN
overall_width	1.750 INCHES NOMINAL IN
overall_length	1.750 INCHES NOMINAL IN
aperture_diameter	1.531 INCHES NOMINAL IN
precious_material	SILVER
bolt_hole_quantity	4
outside_corner_radius	0.125 INCHES NOMINAL IN
cross-sectional_thickness	0.030 INCHES NOMINAL IN
precious_material_and_location	THROUGHOUT RF SHIELDING GASKET SILVER
outside_edge_to_bolt_hole_center_distance_along_width	0.375 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length	0.375 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width	1.375 INCHES NOMINAL IN
NSN	5999-00-603-7458

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL THICKNESS: 0.030 INCHES NOMINAL IN

•

PRECIOUS MATERIAL: SILVER

•

APERTURE DIAMETER: 1.531 INCHES NOMINAL IN

•

BOLT HOLE QUANTITY: 4

•

CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.375 INCHES NOMINAL IN

•

CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.375 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL THICKNESS	0.030 INCHES NOMINAL IN
PRECIOUS MATERIAL	SILVER
OVERALL LENGTH	1.750 INCHES NOMINAL IN
OVERALL WIDTH	1.750 INCHES NOMINAL IN
APERTURE DIAMETER	1.531 INCHES NOMINAL IN
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.375 INCHES NOMINAL IN
PRECIOUS MATERIAL AND LOCATION	THROUGHOUT RF SHIELDING GASKET SILVER
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.375 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 4

85-61124Reference document

Same NSN cross-reference

Reference document — Secondary reference

23-0100-0043Reference document

Same NSN cross-reference

Reference document — Secondary reference

84-61124Reference document

Same NSN cross-reference

Reference document — Secondary reference

39-01-C198-1350Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 247ASC0650-013?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 247ASC0650-013?

247ASC0650-013 is a 247ASC0650-013. It is classified as a MRO (MRO_GENERAL).

What parts can replace 247ASC0650-013?

There are 4 known substitutes for 247ASC0650-013: 85-61124, 23-0100-0043, 84-61124 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 247ASC0650-013?

247ASC0650-013 is cataloged in the U.S. Government catalog under NSN 5999-00-603-7458. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

247ASC0650-013 — 247ASC0650-013

Request a Quote — 247ASC0650-013