PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 247949PC5
247949PC5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, rim_surface_width: 0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN, inner_groove_width: 0.110 INCHES NOMINAL IN, peripheral_diameter: 1.250 INCHES NOMINAL IN, center_hole_diameter: 0.875 INCHES NOMINAL IN, cross-sectional_height: 0.234 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-3630, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
247949PC5
NSN: 5330-00-297-3630
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
rim_surface_width0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
inner_groove_width0.110 INCHES NOMINAL IN
peripheral_diameter1.250 INCHES NOMINAL IN
center_hole_diameter0.875 INCHES NOMINAL IN
cross-sectional_height0.234 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-297-3630
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 247949PC5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RIM SURFACE WIDTH: 0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
PERIPHERAL DIAMETER: 1.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
INNER GROOVE WIDTH: 0.110 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.234 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RIM SURFACE WIDTH0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
PERIPHERAL DIAMETER1.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
INNER GROOVE WIDTH0.110 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.234 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
SAE-J512Interchangeable
interchangeable cross-reference
interchangeable
144303Interchangeable
interchangeable cross-reference
interchangeable
41X2Interchangeable
interchangeable cross-reference
interchangeable
42300Interchangeable
interchangeable cross-reference
interchangeable
271678PC2Interchangeable
interchangeable cross-reference
interchangeable
146392PC21Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 247949PC5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 247949PC5?
247949PC5 is a PACKING,PREFORMED.
What parts can replace 247949PC5?
There are 23 known substitutes for 247949PC5: SAE-J512, 144303, 41X2 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 247949PC5?
247949PC5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-3630. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 247949PC5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026