PartsTable
Technical Data Sheet
Download PDF

247693 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

247693: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.516 INCHES MINIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.563 INCHES NOMINAL IN, overall_length: 7.938 INCHES NOMINAL IN, cross-sectional_thickness: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN, center_to_center_distance_between_bolt_holes_along_length: 3.969 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-261-2448, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
247693
NSN: 5330-01-261-2448
NIINs: 012612448, 013422548
FSC: 5330 — Packing and Gasket Materials
CAGE: 21444 — REXNORD INDUSTRIES LLC (USA)
SPECIFICATIONS
hole_diameter0.516 INCHES MINIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.563 INCHES NOMINAL IN
overall_length7.938 INCHES NOMINAL IN
bolt_hole_quantity3
cross-sectional_thickness0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
center_to_center_distance_between_bolt_holes_along_length3.969 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-261-2448
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 247693 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 3
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.969 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
HOLE DIAMETER: 0.516 INCHES MINIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
OVERALL LENGTH7.938 INCHES NOMINAL IN
OVERALL WIDTH2.563 INCHES NOMINAL IN
BOLT HOLE QUANTITY3
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.969 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
HOLE DIAMETER0.516 INCHES MINIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 247693?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 247693?
247693 is a GASKET.
What is the NSN for 247693?
247693 is cataloged in the U.S. Government catalog under NSN 5330-01-261-2448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 247693

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.