PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2476234
2476234 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.531 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 1.000 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, material_thickness: 0.062 INCHES NOMINAL IN, loop_inside_diameter: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-005-0917, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2476234
NSN: 5340-00-005-0917
FSC: 5340
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
diameter0.531 INCHES NOMINAL IN
materialSTEEL BAND
overall_width1.000 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
material_thickness0.062 INCHES NOMINAL IN
loop_inside_diameter0.500 INCHES NOMINAL IN
end_item_identification2320-01-097-0260 HEMTT - HEAVY EXPANDED MOBILITY TACTICAL TRUCK
distance_from_loop_center_to_tongue_end1.469 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.969 INCHES NOMINAL IN
NSN5340-00-005-0917
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2476234 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC CUSHION
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.969 INCHES NOMINAL IN
•
DIAMETER: 0.531 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.469 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC CUSHION
STYLE DESIGNATOROFFSET MOUNT
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.969 INCHES NOMINAL IN
DIAMETER0.531 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.469 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
MATERIALSTEEL BAND
END ITEM IDENTIFICATION2320-01-097-0260 HEMTT - HEAVY EXPANDED MOBILITY TACTICAL TRUCK
OVERALL WIDTH1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
4475Interchangeable
IBM 4GB (2 x 2GB DDR2) Main Storage
interchangeable
PS 3480Interchangeable
interchangeable cross-reference
interchangeable
250024-470Interchangeable
interchangeable cross-reference
interchangeable
49836Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2476234?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2476234?
2476234 is a CLAMP,LOOP.
What parts can replace 2476234?
There are 4 known substitutes for 2476234: 4475, PS 3480, 250024-470 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2476234?
2476234 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-005-0917. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2476234

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026