PartsTable
Technical Data Sheet
Download PDF

247235 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

247235: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-123-4536, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
247235
NSN: 5331-01-123-4536
FSC: 5331 — O-ring
CAGE: 06853 — BENDIX COMMERCIAL VEHICLE SYSTEMS LLC DBA BENDIX COMMERCIAL VEHICLE SYSTEMS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationNSN 2320-01-304-2277 PLS (PALLETIZED LOADING SYSTEM); NSN 2320-01-318-9902 HET (HEAVY EQUIPMENT TRANSPORTER);HEMTT FAMILY (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS)
NSN5331-01-123-4536
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 247235 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.710 INCHES MINIMUM AND 2.758 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONNSN 2320-01-304-2277 PLS (PALLETIZED LOADING SYSTEM); NSN 2320-01-318-9902 HET (HEAVY EQUIPMENT TRANSPORTER);HEMTT FAMILY (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS)
MATERIALRUBBER SYNTHETIC
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
10510532Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 247235?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 247235?
247235 is a O-RING.
What parts can replace 247235?
There is 1 known substitute for 247235: 10510532. Substitute compatibility should be verified for your specific system.
What is the NSN for 247235?
247235 is cataloged in the U.S. Government catalog under NSN 5331-01-123-4536. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 247235