PartsTable
Technical Data Sheet
Download PDF

2470236G2 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2470236G2: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, nut_style: ROUND, nut_diameter: 0.250 INCHES NOMINAL IN, thread_class: 2B, nut_thickness: 0.375 INCHES NOMINAL IN, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-021-7157, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2470236G2
NSN: 5310-00-021-7157
FSC: 5310 — Nuts and Washers
CAGE: 28527 — L3HARRIS TECHNOLOGIES, INC. (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
nut_styleROUND
nut_diameter0.250 INCHES NOMINAL IN
thread_class2B
nut_thickness0.375 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
nominal_thread_size0.112 INCHES IN
thread_quantity_per_inch40
material_document_and_classificationQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-021-7157
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2470236G2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
NUT DIAMETER: 0.250 INCHES NOMINAL IN
•
NUT THICKNESS: 0.375 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
NUT STYLE: ROUND
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
NUT DIAMETER0.250 INCHES NOMINAL IN
NUT THICKNESS0.375 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
NUT STYLEROUND
THREAD CLASS2B
THREAD QUANTITY PER INCH40
SUBSTITUTES & CROSS-REFERENCES 3
HY511-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
2371Reference document
Same NSN cross-reference
Reference document — Secondary reference
8154B0440-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2470236G2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2470236G2?
2470236G2 is a NUT,PLAIN,ROUND.
What parts can replace 2470236G2?
There are 3 known substitutes for 2470236G2: HY511-2, 2371, 8154B0440-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 2470236G2?
2470236G2 is cataloged in the U.S. Government catalog under NSN 5310-00-021-7157. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2470236G2