PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2469811-2
2469811-2 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, flange_width: 0.0310 INCHES NOMINAL IN, bore_diameter: 0.1875 INCHES NOMINAL IN, overall_width: 0.1250 INCHES NOMINAL IN, load_direction: RADIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-724-7886, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2469811-2
NSN: 3110-00-724-7886
FSC: 3110
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
flange_width0.0310 INCHES NOMINAL IN
bore_diameter0.1875 INCHES NOMINAL IN
overall_width0.1250 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0002 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
flange_outside_diameter0.4220 INCHES NOMINAL IN
NSN3110-00-724-7886
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2469811-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-7118 MIL SPEC SINGLE MATERIAL RESPONSE
•
RETAINER FABRICATION METHOD: PRESSED
•
FLANGE WIDTH: 0.0310 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
OUTER RING OUTSIDE DIAMETER: 0.3750 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-7118 MIL SPEC SINGLE MATERIAL RESPONSE
RETAINER FABRICATION METHODPRESSED
FLANGE WIDTH0.0310 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
OUTER RING OUTSIDE DIAMETER0.3750 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
FLANGE OUTSIDE DIAMETER0.4220 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
M81793/08-EC1N2N1A1Interchangeable
interchangeable cross-reference
interchangeable
NM062DInterchangeable
interchangeable cross-reference
interchangeable
SFR1-5Interchangeable
interchangeable cross-reference
interchangeable
SS418FCHHP24L0-1Interchangeable
interchangeable cross-reference
interchangeable
SFR144PPK24Interchangeable
interchangeable cross-reference
interchangeable
603-002-006Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2469811-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2469811-2?
2469811-2 is a BEARING,BALL,ANNULAR.
What parts can replace 2469811-2?
There are 24 known substitutes for 2469811-2: M81793/08-EC1N2N1A1, NM062D, SFR1-5 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2469811-2?
2469811-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-724-7886. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2469811-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026