2468667-1REVA — BEARING,BALL,DUPLEX

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

2468667-1REVA: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_diameter: 11.0000 INCHES MINIMUM AND 11.0005 INCHES MAXIMUM IN, overall_width: 1.9900 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND, style_designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-723-9429, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2468667-1REVA

NSN: 3110-00-723-9429
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)

SPECIFICATIONS

material	STEEL INNER RING
bore_diameter	11.0000 INCHES MINIMUM AND 11.0005 INCHES MAXIMUM IN
overall_width	1.9900 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN
load_direction	ANGULAR
surface_finish	GROUND
style_designator	COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
overall_outside_diameter	13.0000 INCHES MINIMUM AND 13.0005 INCHES MAXIMUM IN
bearing_preload_designation	LIGHT
retainer_fabrication_method	MACHINED
lubrication_material_document_and_classification	MIL-L-15719 MIL SPEC SINGLE MATERIAL RESPONSE
NSN	3110-00-723-9429

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: MACHINED

•

SURFACE FINISH: GROUND

•

BEARING PRELOAD DESIGNATION: LIGHT

•

STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING

•

OVERALL OUTSIDE DIAMETER: 13.0000 INCHES MINIMUM AND 13.0005 INCHES MAXIMUM IN

•

LOAD DIRECTION: ANGULAR

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	MACHINED
SURFACE FINISH	GROUND
BEARING PRELOAD DESIGNATION	LIGHT
STYLE DESIGNATOR	COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
OVERALL WIDTH	1.9900 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER	13.0000 INCHES MINIMUM AND 13.0005 INCHES MAXIMUM IN
LOAD DIRECTION	ANGULAR
SPECIAL FEATURES	WITH INNER AND OUTER RING SPACER,RADIAL RUNOUT ASSEMBLED 0.0020 IN. T.I.R.,AXIAL RUNOUT 0.0010 IN. R.I.R.,STARTING TORQUE UNDER RADIAL LOAD OF 15000 LB EQUALS 304 IN. LB,STATING TORQUE UNDER THRUST LOAD OF 8870 LB EQUALS 240 IN. LB,ALL DIMENSIONS APPLY AT 68 DEG F,OVERALL DIMENSION 2.6250 IN. MAKE THE WIDTH OF INNER RACE SPACER SUCH THAT EACH BEARING OF THE MATCH PAIR WILL BE PRELOADED AXIAALY 0.0005 IN. WHEN ASSEMBLED IN MACHINE,OVER 25 DEG ANGULARITY LBS
BORE DIAMETER	11.0000 INCHES MINIMUM AND 11.0005 INCHES MAXIMUM IN
MATERIAL	STEEL OUTER RING

SUBSTITUTES & CROSS-REFERENCES 2

2468667PC1Reference document

Same NSN cross-reference

Reference document — Secondary reference

21-427-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy 2468667-1REVA?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2468667-1REVA?

2468667-1REVA is a BEARING,BALL,DUPLEX.

What parts can replace 2468667-1REVA?

There are 2 known substitutes for 2468667-1REVA: 2468667PC1, 21-427-3. Substitute compatibility should be verified for your specific system.

What is the NSN for 2468667-1REVA?

2468667-1REVA is cataloged in the U.S. Government catalog under NSN 3110-00-723-9429. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2468667-1REVA — BEARING,BALL,DUPLEX

Request a Quote — 2468667-1REVA