PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 246694
246694 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SHAFT ASSEMBLY,SHOULDERED is a the manufacturer industrial component. Key specifications include end_item_identification: 3830-01-384-5310, nonsupply_items_and_quantities: 89749 246695 SHAFT 1, 89749 33G404 PLUG 1. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-945-3886, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
246694
NSN: 5330-00-945-3886
FSC: 5330
CAGE: 63857 — CIRCOR NAVAL SOLUTIONS LLC DBA WARREN PUMPS (USA)
SPECIFICATIONS
component_quantity2
end_item_identification3830-01-384-5310
nonsupply_items_and_quantities89749 246695 SHAFT 1, 89749 33G404 PLUG 1
NSN5330-00-945-3886
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 246694 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER GROOVE WIDTH: 0.062 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CENTER HOLE DIAMETER: 1.562 INCHES NOMINAL IN
•
COLOR: BLACK
•
CROSS-SECTIONAL HEIGHT: 0.343 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 1.937 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
OUTER GROOVE DEPTH: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTER GROOVE WIDTH0.062 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
CENTER HOLE DIAMETER1.562 INCHES NOMINAL IN
COLORBLACK
CROSS-SECTIONAL HEIGHT0.343 INCHES NOMINAL IN
PERIPHERAL DIAMETER1.937 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
OUTER GROOVE DEPTH0.093 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
DT33-3Interchangeable
interchangeable cross-reference
interchangeable
080-104Interchangeable
interchangeable cross-reference
interchangeable
CAS-A2-10Interchangeable
interchangeable cross-reference
interchangeable
T33Interchangeable
interchangeable cross-reference
interchangeable
F395/1-14Interchangeable
interchangeable cross-reference
interchangeable
10328266Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 246694?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 246694?
246694 is a SHAFT ASSEMBLY,SHOULDERED.
What parts can replace 246694?
There are 8 known substitutes for 246694: DT33-3, 080-104, CAS-A2-10 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 246694?
246694 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-945-3886. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 246694

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026