PartsTable
Technical Data Sheet
Download PDF

246497 — CAP,PILLOW BLOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

246497: CAP,PILLOW BLOCK.

The CAP,PILLOW BLOCK is a the manufacturer industrial component. Key specifications include inner_groove_width: 0.250 INCHES NOMINAL IN, outer_groove_depth: 0.099 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN, outer_groove_width: 0.094 INCHES NOMINAL IN, peripheral_diameter: 3.000 INCHES NOMINAL IN, center_hole_diameter: 2.596 INCHES NOMINAL IN, cross-sectional_height: 0.344 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-973-8965, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
246497
NSN: 5330-00-973-8965
NIINs: 009738965, 013594592
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
inner_groove_width0.250 INCHES NOMINAL IN
outer_groove_depth0.099 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
outer_groove_width0.094 INCHES NOMINAL IN
peripheral_diameter3.000 INCHES NOMINAL IN
center_hole_diameter2.596 INCHES NOMINAL IN
cross-sectional_height0.344 INCHES NOMINAL IN
NSN5330-00-973-8965
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 246497 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER GROOVE DEPTH: 0.099 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.344 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 3.000 INCHES NOMINAL IN
•
OUTER GROOVE WIDTH: 0.094 INCHES NOMINAL IN
•
INNER GROOVE WIDTH: 0.250 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 2.596 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTER GROOVE DEPTH0.099 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.344 INCHES NOMINAL IN
PERIPHERAL DIAMETER3.000 INCHES NOMINAL IN
OUTER GROOVE WIDTH0.094 INCHES NOMINAL IN
INNER GROOVE WIDTH0.250 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.596 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 246497?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 246497?
246497 is a CAP,PILLOW BLOCK.
What is the NSN for 246497?
246497 is cataloged in the U.S. Government catalog under NSN 5330-00-973-8965. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 246497

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.