PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 246343
246343 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.500 INCHES NOMINAL IN, length: 0.188 INCHES NOMINAL IN, material: PLASTIC VINYL OVERALL, hole_diameter: 0.094 INCHES NOMINAL IN, overall_height: 0.500 INCHES NOMINAL IN, special_features: COLOR BLACK. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-998-5067, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
246343
NSN: 5340-00-998-5067
FSC: 5340
CAGE: 96795 — GOULD INSTRUMENT SYSTEMS INC (USA)
SPECIFICATIONS
width0.500 INCHES NOMINAL IN
length0.188 INCHES NOMINAL IN
materialPLASTIC VINYL OVERALL
hole_diameter0.094 INCHES NOMINAL IN
overall_height0.500 INCHES NOMINAL IN
special_featuresCOLOR BLACK
material_thickness0.030 INCHES NOMINAL IN
loop/holding_dimension0.375 INCHES NOMINAL IN
distance_from_loop_center_to_end0.317 INCHES NOMINAL IN
NSN5340-00-998-5067
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 246343 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO END: 0.317 INCHES NOMINAL IN
•
MATERIAL: PLASTIC VINYL OVERALL
•
LENGTH: 0.188 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.094 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN
•
WIDTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO END0.317 INCHES NOMINAL IN
MATERIALPLASTIC VINYL OVERALL
LENGTH0.188 INCHES NOMINAL IN
HOLE DIAMETER0.094 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR BLACK
OVERALL HEIGHT0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.030 INCHES NOMINAL IN
WIDTH0.500 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
1002470Interchangeable
interchangeable cross-reference
interchangeable
V-100-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 246343?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 246343?
246343 is a CLIP,SPRING TENSION.
What parts can replace 246343?
There are 2 known substitutes for 246343: 1002470, V-100-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 246343?
246343 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-998-5067. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 246343

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026