PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2463-8
2463-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ADAPTER,BATTERY TERMINAL is a the manufacturer cache protection component designed to preserve data integrity during power loss events in enterprise server and storage controller environments. Key specifications include phase: THREE, width: 12.380 INCHES NOMINAL IN, length: 5.250 INCHES NOMINAL IN, material: PLASTIC, thickness: 0.190 INCHES NOMINAL IN, bore_shape: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5295, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2463-8
NSN: 5340-00-205-5295
FSC: 5340
CAGE: 15556 — RICOH AMERICAS CORPORATION (USA)
SPECIFICATIONS
phaseTHREE
width12.380 INCHES NOMINAL IN
length5.250 INCHES NOMINAL IN
materialPLASTIC
thickness0.190 INCHES NOMINAL IN
bore_shapeSTRAIGHT
duty_cycleCONTINUOUS
head_height0.062 INCHES NOMINAL IN
inscriptionCCC LOCATION NOT OTHERWISE SPECIFIED
ambient_temp50.0 CELSIUS DEGC
control_typeLOCAL OR REMOTE
bore_diameter12.00 MILLIMETERS NOMINAL MM
NSN5340-00-205-5295
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2463-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE ACCOMMODATION DIAMETER: 0.312 INCHES NOMINAL IN
•
PRONG QUANTITY: 6
•
HEAD OUTSIDE DIAMETER: 0.438 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STANDARD
•
SURFACE TREATMENT: PHOSPHATE
•
PRONG OUTSIDE DIAMETER: 0.328 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
HOLE ACCOMMODATION DIAMETER0.312 INCHES NOMINAL IN
PRONG QUANTITY6
HEAD OUTSIDE DIAMETER0.438 INCHES NOMINAL IN
STYLE DESIGNATORSTANDARD
SURFACE TREATMENTPHOSPHATE
PRONG OUTSIDE DIAMETER0.328 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
SPECIAL FEATURESPAINTED GRAY WRINKLE FINISH, HEAD ONLY
OVERALL HEIGHT0.250 INCHES NOMINAL IN
HEAD HEIGHT0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
0554-0375Interchangeable
interchangeable cross-reference
interchangeable
2463-8Interchangeable
interchangeable cross-reference
interchangeable
QBT-506164Interchangeable
interchangeable cross-reference
interchangeable
5940-00-549-6583Interchangeable
interchangeable cross-reference
interchangeable
TC15-1549Interchangeable
interchangeable cross-reference
interchangeable
MS75004-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2463-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2463-8?
2463-8 is a ADAPTER,BATTERY TERMINAL.
What parts can replace 2463-8?
There are 11 known substitutes for 2463-8: 0554-0375, 2463-8, QBT-506164 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2463-8?
2463-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5295. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2463-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026