PartsTable
Technical Data Sheet
Download PDF

24621-0001 — PULLEY,TIMING BELT

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

24621-0001: PULLEY,TIMING BELT.

The PULLEY,TIMING BELT is a the manufacturer industrial component. Key specifications include hub_type: SETSCREW, material: ALUMINUM ALLOY 6061, bore_type: SPECIFIED, face_type: SINGLE ROW SPROCKET TEETH, face_width: 0.324 INCHES NOMINAL IN, hub_diameter: 0.442 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-070-5859, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24621-0001
NSN: 3020-01-070-5859
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 19397 — BAE SYSTEMS INFORMATION & ELECTRONIC SYSTEMS INTEGRATION INC. (USA)
SPECIFICATIONS
hub_typeSETSCREW
materialALUMINUM ALLOY 6061
bore_typeSPECIFIED
face_typeSINGLE ROW SPROCKET TEETH
face_width0.324 INCHES NOMINAL IN
hub_diameter0.442 INCHES NOMINAL IN
bore_diameter0.250 INCHES NOMINAL IN
overall_length0.625 INCHES NOMINAL IN
special_featuresHUB 2 SETSCREWS 90 DEGREES APART, USED FOR 3/16 IN. WD BELT IN
surface_treatmentANODIZE
face_pitch_designationXXL
face_groove/tooth_quantity24
NSN3020-01-070-5859
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available PULLEY,TIMING BELT TITLE COMPONENT PN 24621-0001 MFR PULLEY,TIMING BELT
KEY FEATURES
•
HUB TYPE: SETSCREW
•
HUB DIAMETER: 0.442 INCHES NOMINAL IN
•
FACE PITCH DESIGNATION: XXL
•
FACE TYPE: SINGLE ROW SPROCKET TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-325,T6 FED SPEC SINGLE MATERIAL RESPONSE
•
BORE TYPE: SPECIFIED
•
FACE GROOVE/TOOTH QUANTITY: 24
TECHNICAL CHARACTERISTICS
HUB TYPESETSCREW
HUB DIAMETER0.442 INCHES NOMINAL IN
FACE PITCH DESIGNATIONXXL
FACE TYPESINGLE ROW SPROCKET TEETH
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-325,T6 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH0.625 INCHES NOMINAL IN
BORE TYPESPECIFIED
FACE GROOVE/TOOTH QUANTITY24
SPECIAL FEATURESHUB 2 SETSCREWS 90 DEGREES APART, USED FOR 3/16 IN. WD BELT IN
SURFACE TREATMENTANODIZE
SUBSTITUTES & CROSS-REFERENCES 3
233-0298Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
6A6-24DF01808Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
24621Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 24621-0001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24621-0001?
24621-0001 is a PULLEY,TIMING BELT.
What parts can replace 24621-0001?
There are 3 known substitutes for 24621-0001: 233-0298, 6A6-24DF01808, 24621. Substitute compatibility should be verified for your specific system.
What is the NSN for 24621-0001?
24621-0001 is cataloged in the U.S. Government catalog under NSN 3020-01-070-5859. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24621-0001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.