PartsTable
Technical Data Sheet
Download PDF

245857 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

245857: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING BAND, overall_width: 0.645 INCHES NOMINAL IN, tongue_hole_type: ROUND, UNTHREADED, loop_inside_diameter: 0.235 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN, fastening_device_type: STUD TURNLOCK. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-983-1112, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
245857
NSN: 5340-00-983-1112
FSC: 5340 — Hardware, Commercial
CAGE: 61423 — KIDDE TECHNOLOGIES, INC DIV KIDDE AEROSPACE AND DEFENSE (USA)
SPECIFICATIONS
diameter0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING BAND
overall_width0.645 INCHES NOMINAL IN
tongue_hole_typeROUND, UNTHREADED
loop_inside_diameter0.235 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
fastening_device_typeSTUD TURNLOCK
center_to_center_distance_between_first_and_second_holes0.500 INCHES NOMINAL IN
NSN5340-00-983-1112
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 245857 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENING DEVICE TYPE: STUD TURNLOCK
•
DIAMETER: 0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 0.500 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL: STEEL CORROSION RESISTING BAND
•
LOOP INSIDE DIAMETER: 0.235 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENING DEVICE TYPESTUD TURNLOCK
DIAMETER0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
OVERALL WIDTH0.645 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.500 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALSTEEL CORROSION RESISTING BAND
LOOP INSIDE DIAMETER0.235 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 245857?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 245857?
245857 is a CLAMP,LOOP.
What is the NSN for 245857?
245857 is cataloged in the U.S. Government catalog under NSN 5340-00-983-1112. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 245857