PartsTable
Technical Data Sheet
Download PDF

24536-2 — SWITCH,PRESSURE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

24536-2: SWITCH,PRESSURE.

The SWITCH,PRESSURE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, overall_height: 0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, outside_diameter: 1.415 INCHES NOMINAL IN, style_designator: SPRING TENSION, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-087-0255, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 24536-2
NSN: 5310-00-087-0255
NIINs: 000870255, 003201732
FSC: 5310 — Nuts and Washers
CAGE: 16004 — DAVEY COMPRESSOR CO DIV OF KECO INDUSTRIES INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
overall_height0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
outside_diameter1.415 INCHES NOMINAL IN
style_designatorSPRING TENSION
surface_treatmentCADMIUM OVERALL
material_thickness0.025 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533 TEMPER A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-087-0255
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 24536-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPRING TENSION
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 TEMPER A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.415 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
•
HOLE DIAMETER: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
STYLE DESIGNATORSPRING TENSION
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 TEMPER A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.415 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALCOPPER ALLOY OVERALL
HOLE DIAMETER0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 24536-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24536-2?
24536-2 is a SWITCH,PRESSURE. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 24536-2?
24536-2 is cataloged in the U.S. Government catalog under NSN 5310-00-087-0255. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24536-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.