PartsTable
Technical Data Sheet
Download PDF

245172 — INSULATION SLEEVING,ELECTRICAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

245172: INSULATION SLEEVING,ELECTRICAL.

The INSULATION SLEEVING,ELECTRICAL is a the manufacturer industrial component. Key specifications include diameter: 0.173 INCHES NOMINAL IN, material: RUBBER, overall_width: 0.375 INCHES NOMINAL IN, overall_length: 13.0 INCHES NOMINAL IN, inside_diameter: 2.75 INCHES NOMINAL IN, special_features: ONE 1/4 IN-1/2 IN TO 1-5/8 IN OR 1-1/4 IN IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-598-0296, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
245172
NSN: 5340-00-598-0296
NIINs: 005980296, 016990437
FSC: 5340 — Hardware, Commercial
CAGE: 9N770 — TELEPHONICS CORP/PRD INSTRUMENTS (USA)
SPECIFICATIONS
diameter0.173 INCHES NOMINAL IN
materialRUBBER
overall_width0.375 INCHES NOMINAL IN
overall_length13.0 INCHES NOMINAL IN
inside_diameter2.75 INCHES NOMINAL IN
special_featuresONE 1/4 IN-1/2 IN TO 1-5/8 IN OR 1-1/4 IN IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.045 INCHES NOMINAL IN
loop_inside_diameter0.438 INCHES NOMINAL IN
end_item_identificationANTENNA SYSTEM
environmental_protectionULTRAVIOLET RESISTANT
NSN5340-00-598-0296
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 245172 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.173 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.045 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.707 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.520 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.173 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.045 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.707 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.520 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
LOOP INSIDE DIAMETER0.438 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 7
NSA553607Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
G205654-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
4049950601Reference document
Same NSN cross-reference
Reference document — Secondary reference
12-115-00-015Reference document
Same NSN cross-reference
Reference document — Secondary reference
N7141800517Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HP7NReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 245172?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 245172?
245172 is a INSULATION SLEEVING,ELECTRICAL.
What parts can replace 245172?
There are 7 known substitutes for 245172: NSA553607, G205654-5, 4049950601 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 245172?
245172 is cataloged in the U.S. Government catalog under NSN 5340-00-598-0296. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 245172

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.