PartsTable
Technical Data Sheet
PartsTable / MRO / 245105
245105 ✓ Verified by PartsTable
Duracell · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a Duracell industrial component. Key specifications include material: STEEL, head_style: PAN, body_length: 0.562 INCHES NOMINAL IN, head_height: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, thread_class: 2A A, body_diameter: 0.225 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-246-6922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 245105
NSN: 5315-00-246-6922
FSC: 5315
CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL
head_stylePAN
body_length0.562 INCHES NOMINAL IN
head_height0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
thread_class2A A
body_diameter0.225 INCHES NOMINAL IN
head_diameter0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
terminal_typeWIRE LEAD
thread_length1.013 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
inclosure_typeENCAPSULATED
fastener_length1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
first_end_styleSQUARE
NSN5315-00-246-6922
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 245105 · Duracell ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL LENGTH: 2.000 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.3750 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: DRILLED THRU CENTER
•
HARDNESS RATING: 86.0 ROCKWELL B MINIMUM AND 93.8 ROCKWELL B MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST HOLE DIAMETER0.125 INCHES NOMINAL IN
FIRST END STYLESQUARE
MATERIALSTEEL OVERALL
PIN OVERALL LENGTH2.000 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.3750 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEDRILLED THRU CENTER
HARDNESS RATING86.0 ROCKWELL B MINIMUM AND 93.8 ROCKWELL B MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
GB5105Interchangeable
interchangeable cross-reference
interchangeable
24-510-5Interchangeable
interchangeable cross-reference
interchangeable
6L.5108.006.00-260940Interchangeable
interchangeable cross-reference
interchangeable
24510-1Interchangeable
interchangeable cross-reference
interchangeable
16YE054-7Interchangeable
interchangeable cross-reference
interchangeable
10113666Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 245105?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 245105?
245105 is a RESISTOR,FIXED,COMPOSITION manufactured by Duracell. It is classified as a MRO (MRO_GENERAL).
What parts can replace 245105?
There are 7 known substitutes for 245105: GB5105, 24-510-5, 6L.5108.006.00-260940 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 245105?
245105 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-246-6922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 245105

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026