PartsTable
Technical Data Sheet
Download PDF

24504-600 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

24504-600: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 301 BAND, overall_width: 1.125 INCHES NOMINAL IN, style_designator: T-BOLT, material_thickness: 0.080 INCHES NOMINAL IN, loop_inside_diameter: 6.000 INCHES NOMINAL IN, integral_nut_type_and_quantity: 1 SELF-LOCKING LUG. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-942-7211, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24504-600
NSN: 5340-00-942-7211
FSC: 5340 — Hardware, Commercial
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialSTEEL COMP 301 BAND
overall_width1.125 INCHES NOMINAL IN
style_designatorT-BOLT
material_thickness0.080 INCHES NOMINAL IN
loop_inside_diameter6.000 INCHES NOMINAL IN
integral_nut_type_and_quantity1 SELF-LOCKING LUG
material_document_and_classificationMIL-S-5059,1/2 H MIL SPEC SINGLE MATERIAL RESPONSE BAND
NSN5340-00-942-7211
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24504-600 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: T-BOLT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,1/2 H MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL THICKNESS: 0.080 INCHES NOMINAL IN
•
INTEGRAL NUT TYPE AND QUANTITY: 1 SELF-LOCKING LUG
•
MATERIAL: STEEL COMP 301 BAND
•
LOOP INSIDE DIAMETER: 6.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORT-BOLT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059,1/2 H MIL SPEC SINGLE MATERIAL RESPONSE BAND
OVERALL WIDTH1.125 INCHES NOMINAL IN
MATERIAL THICKNESS0.080 INCHES NOMINAL IN
INTEGRAL NUT TYPE AND QUANTITY1 SELF-LOCKING LUG
MATERIALSTEEL COMP 301 BAND
LOOP INSIDE DIAMETER6.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 24504-600?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24504-600?
24504-600 is a CLAMP,LOOP.
What is the NSN for 24504-600?
24504-600 is cataloged in the U.S. Government catalog under NSN 5340-00-942-7211. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24504-600