PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 244H16
244H16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN, temp_rating: 250.0 FAHRENHEIT DEGF, housing_bore_diameter: 2.440 INCHES MINIMUM AND 2.442 INCHES MAXIMUM IN, sealing_element_style: VERTICAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-997-1899, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
244H16
NSN: 5330-00-997-1899
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
temp_rating250.0 FAHRENHEIT DEGF
housing_bore_diameter2.440 INCHES MINIMUM AND 2.442 INCHES MAXIMUM IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.176 INCHES MINIMUM AND 1.178 INCHES MAXIMUM IN
NSN5330-00-997-1899
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 244H16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 2.440 INCHES MINIMUM AND 2.442 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: VERTICAL
•
TEMP RATING: 250.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
•
MATERIAL: STEEL CASE
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.176 INCHES MINIMUM AND 1.178 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER2.440 INCHES MINIMUM AND 2.442 INCHES MAXIMUM IN
SEALING ELEMENT STYLEVERTICAL
TEMP RATING250.0 FAHRENHEIT DEGF
SEAL WIDTH0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.176 INCHES MINIMUM AND 1.178 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
K600-405Interchangeable
interchangeable cross-reference
interchangeable
7030050Interchangeable
interchangeable cross-reference
interchangeable
1321-0405Interchangeable
interchangeable cross-reference
interchangeable
11600Interchangeable
interchangeable cross-reference
interchangeable
MC-1Interchangeable
interchangeable cross-reference
interchangeable
400-12583-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 244H16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 244H16?
244H16 is a SEAL,PLAIN ENCASED.
What parts can replace 244H16?
There are 21 known substitutes for 244H16: K600-405, 7030050, 1321-0405 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 244H16?
244H16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-997-1899. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 244H16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026