PartsTable
Technical Data Sheet
Download PDF

24495 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
Clementoni · MRO · MRO_GENERAL
PRODUCT OVERVIEW

24495: RESISTOR,VARIABLE,WIRE WOUND,NON.

Marvel Avengers - 24 pcs - Supercolor Puzzle. Key specifications include material: LEAD ALLOY INNER LAYER, nut_style: SLOTTED, HEXAGON, body_width: 7.500 INCHES MINIMUM AND 7.624 INCHES MAXIMUM IN, nut_height: 0.500 INCHES NOMINAL IN, body_height: 7.000 INCHES MINIMUM AND 7.124 INCHES MAXIMUM IN, body_length: 9.750 INCHES MINIMUM AND 9.874 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-274-8214, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 24495
NSN: 5310-00-274-8214
NIINs: 002748214, 004098310, 005661551, 006893207, 007223288, 010416285, 010554141, 012784892
FSC: 5310 — Nuts and Washers
CAGE: 04627 — HYSTER-YALE GROUP, INC. DIV HYSTER-YALE MATERIALS HANDLING (USA)
SPECIFICATIONS
materialLEAD ALLOY INNER LAYER
nut_styleSLOTTED, HEXAGON
body_width7.500 INCHES MINIMUM AND 7.624 INCHES MAXIMUM IN
nut_height0.500 INCHES NOMINAL IN
body_height7.000 INCHES MINIMUM AND 7.124 INCHES MAXIMUM IN
body_length9.750 INCHES MINIMUM AND 9.874 INCHES MAXIMUM IN
bonnet_typeINSIDE SCREW
corner_shapeSQUARE ALL CORNERS
thread_class3B
thread_seriesUNEF
inclosure_typeFULLY INCLOSED
overall_length0.9370 INCHES NOMINAL IN
NSN5310-00-274-8214
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 24495 · Clementoni ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.625 INCHES NOMINAL IN
•
THREAD SERIES: UNEF
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A304 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A322 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A331 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A304 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.125 INCHES IN
•
NUT HEIGHT: 0.500 INCHES NOMINAL IN
•
NUT STYLE: SLOTTED, HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.625 INCHES NOMINAL IN
THREAD SERIESUNEF
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A304 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A322 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A331 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A304 ASSN STD 2ND MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.125 INCHES IN
NUT HEIGHT0.500 INCHES NOMINAL IN
NUT STYLESLOTTED, HEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH18
SUBSTITUTES & CROSS-REFERENCES 6
019205Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2084165Reference document
Same NSN cross-reference
Reference document — Secondary reference
54556HReference document
Same NSN cross-reference
Reference document — Secondary reference
29314Reference document
Same NSN cross-reference
Reference document — Secondary reference
921103Reference document
Same NSN cross-reference
Reference document — Secondary reference
328134Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 24495?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24495?
24495 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 24495?
There are 6 known substitutes for 24495: 019205, 2084165, 54556H and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 24495?
24495 is cataloged in the U.S. Government catalog under NSN 5310-00-274-8214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24495

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.