PartsTable
Technical Data Sheet
Download PDF

2448662 — FELT,MECHANICAL,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2448662: FELT,MECHANICAL,PREFORMED.

The FELT,MECHANICAL,PREFORMED is a the manufacturer industrial component. Key specifications include material: WOOL COMP 16R1X OVERALL, outside_diameter: 0.531 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.281 INCHES NOMINAL IN, cross-sectional_width: 0.062 INCHES NOMINAL IN, cross-sectional_height: 0.531 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-237-3538, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2448662
NSN: 5330-01-237-3538
FSC: 5330 — Packing and Gasket Materials
CAGE: 18355 — THE BOEING COMPANY (USA)
SPECIFICATIONS
materialWOOL COMP 16R1X OVERALL
outside_diameter0.531 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.281 INCHES NOMINAL IN
cross-sectional_width0.062 INCHES NOMINAL IN
cross-sectional_height0.531 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR
NSN5330-01-237-3538
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2448662 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.531 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OUTSIDE DIAMETER: 0.531 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.281 INCHES NOMINAL IN
•
MATERIAL: WOOL COMP 16R1X OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.531 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.062 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OUTSIDE DIAMETER0.531 INCHES NOMINAL IN
APERTURE DIAMETER0.281 INCHES NOMINAL IN
MATERIALWOOL COMP 16R1X OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
61A107C13-5Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
61A107C13Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2448662?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2448662?
2448662 is a FELT,MECHANICAL,PREFORMED.
What parts can replace 2448662?
There are 2 known substitutes for 2448662: 61A107C13-5, 61A107C13. Substitute compatibility should be verified for your specific system.
What is the NSN for 2448662?
2448662 is cataloged in the U.S. Government catalog under NSN 5330-01-237-3538. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2448662

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.