PartsTable
Technical Data Sheet
Download PDF

2447343-1 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2447343-1: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.388 INCHES NOMINAL IN, height: 0.080 INCHES NOMINAL IN, length: 0.344 INCHES NOMINAL IN, material: COPPER ALLOY 172, hole_diameter: 0.119 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN, furnished_items: LOCKNUT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-015-6797, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2447343-1
NSN: 5340-01-015-6797
FSC: 5340 — Hardware, Commercial
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
width0.388 INCHES NOMINAL IN
height0.080 INCHES NOMINAL IN
length0.344 INCHES NOMINAL IN
materialCOPPER ALLOY 172
hole_diameter0.119 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
material_document_and_classificationQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-015-6797
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2447343-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.344 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE
•
HEIGHT: 0.080 INCHES NOMINAL IN
•
WIDTH: 0.388 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY 172
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.119 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH0.344 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE
HEIGHT0.080 INCHES NOMINAL IN
WIDTH0.388 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 172
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.119 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2447343-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2447343-1?
2447343-1 is a CLAMP,SYNCHRO.
What is the NSN for 2447343-1?
2447343-1 is cataloged in the U.S. Government catalog under NSN 5340-01-015-6797. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2447343-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.