PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 243A
243A ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

TERMINAL JUNCTION BLOCK,SECTIONA. Key specifications include material: PLASTIC, POLYETHYLENE (PP) TUBE, body_style: BUSHING MOUNTED LONG FRAME, body_width: 0.562 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, terminal_type: TAB, SOLDER LUG, exterior_color: GREEN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-833-1868, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
243A
NSN: 4720-00-833-1868
FSC: 4720
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP) TUBE
body_styleBUSHING MOUNTED LONG FRAME
body_width0.562 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
terminal_typeTAB, SOLDER LUG
exterior_colorGREEN
overall_height0.812 INCHES NOMINAL IN
overall_length3.359 INCHES NOMINAL IN
inside_diameter1.000 INCHES NOMINAL IN
outside_diameter1.562 INCHES NOMINAL IN
special_featuresHIGH PRESSURE HYDRAULIC FLUIDS AND PETROLEUM BASED FLUIDS APPLICATION
features_providedNONSKIVE
NSN4720-00-833-1868
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 243A · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE SURFACE CONDITION: SMOOTH
•
MINIMUM INSIDE BENDING RADIUS: 12.000 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER MOLDED POLYURETHANE
•
EXTERIOR COLOR: GREEN
•
OPERATING PRESSURE: 2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
MATERIAL: PLASTIC, POLYETHYLENE (PP) TUBE
•
HYDROSTATIC TEST PRESSURE: 4000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE SURFACE CONDITIONSMOOTH
MINIMUM INSIDE BENDING RADIUS12.000 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED WIRE AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER MOLDED POLYURETHANE
EXTERIOR COLORGREEN
OPERATING PRESSURE2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MATERIALPLASTIC, POLYETHYLENE (PP) TUBE
SPECIAL FEATURESHIGH PRESSURE HYDRAULIC FLUIDS AND PETROLEUM BASED FLUIDS APPLICATION
HYDROSTATIC TEST PRESSURE4000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
TEMP RATING-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
BURST TEST PRESSURE8000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
22903N PIECE 57Interchangeable
interchangeable cross-reference
interchangeable
N59016Interchangeable
interchangeable cross-reference
interchangeable
59016Interchangeable
interchangeable cross-reference
interchangeable
3110001561432Interchangeable
interchangeable cross-reference
interchangeable
3110-156-1432Interchangeable
interchangeable cross-reference
interchangeable
60620P255Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 243A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 243A?
243A is a TERMINAL JUNCTION BLOCK,SECTIONA.
What parts can replace 243A?
There are 27 known substitutes for 243A: 22903N PIECE 57, N59016, 59016 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 243A?
243A is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-833-1868. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 243A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026