PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2435-5
2435-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FUSE CUTOUT,PRIMARY EXPULSION is a the manufacturer industrial component. Key specifications include phase: THREE, material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING, duty_cycle: CONTINUOUS, ambient_temp: 50.0 CELSIUS DEGC, construction: ONE-PIECE, control_type: LOCAL OR REMOTE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-559-6749, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2435-5
NSN: 5330-00-559-6749
FSC: 5330
CAGE: 77969 — RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. DBA RUBBERCRAFT CORP (USA)
SPECIFICATIONS
phaseTHREE
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING
duty_cycleCONTINUOUS
ambient_temp50.0 CELSIUS DEGC
constructionONE-PIECE
control_typeLOCAL OR REMOTE
overall_width22.000 INCHES NOMINAL IN
overall_height24.000 INCHES NOMINAL IN
overall_length10.000 INCHES NOMINAL IN
size_designator1
actuation_methodMAGNETIC
actuator_voltage440.0 AC
NSN5330-00-559-6749
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2435-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE PACKING
•
MATERIAL: STEEL RETAINER
•
SURFACE TREATMENT: CADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE RETAINER
•
OUTSIDE DIAMETER: 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
•
PACKING INSIDE DIAMETER: 0.294 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC ALL TREATMENT RESPONSES RETAINER
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE PACKING
MATERIALSTEEL RETAINER
SURFACE TREATMENTCADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE RETAINER
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING
OUTSIDE DIAMETER0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
PACKING INSIDE DIAMETER0.294 INCHES MINIMUM AND 0.314 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC ALL TREATMENT RESPONSES RETAINER
PACKING RING CROSS-SECTIONAL DIAMETER0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
RETAINER THICKNESS0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
CONSTRUCTIONONE-PIECE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
24355-001Interchangeable
interchangeable cross-reference
interchangeable
24355Interchangeable
interchangeable cross-reference
interchangeable
13226E0436Interchangeable
interchangeable cross-reference
interchangeable
24350Interchangeable
interchangeable cross-reference
interchangeable
MODEL 243Interchangeable
interchangeable cross-reference
interchangeable
600-042 5-16Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2435-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2435-5?
2435-5 is a FUSE CUTOUT,PRIMARY EXPULSION.
What parts can replace 2435-5?
There are 6 known substitutes for 2435-5: 24355-001, 24355, 13226E0436 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2435-5?
2435-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-559-6749. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2435-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026