PartsTable / COMPONENT / 243430
243430
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.340 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.138 INCHES NOMINAL IN, special_features: CONTAINS NON-ASBESTOS MATERIAL, end_item_identification: MRAP - COMMON NSN - USED ON BUFFALO AND 11 OTHER WEAPON SYSTEMS, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-7272, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
243430
NSN: 5330-00-297-7272 FSC: 5330 CAGE: 97907 — TEREX CORP (USA)
SPECIFICATIONS
hole_diameter 0.340 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 0.138 INCHES NOMINAL IN special_features CONTAINS NON-ASBESTOS MATERIAL end_item_identification MRAP - COMMON NSN - USED ON BUFFALO AND 11 OTHER WEAPON SYSTEMS cross-sectional_thickness 0.031 INCHES NOMINAL IN environmental_attribute_code ASBESTOS ALTERNATIVE PRODUCTS center_to_center_distance_between_bolt_holes_along_length 2.750 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN NSN 5330-00-297-7272
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 243430
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• APERTURE LENGTH: 2.125 INCHES NOMINAL IN
• HOLE DIAMETER: 0.344 INCHES NOMINAL ALL HOLES IN
• CROSS-SECTIONAL THICKNESS: 0.009 INCHES NOMINAL IN
• APERTURE WIDTH: 0.812 INCHES NOMINAL IN
• INSIDE CORNER RADIUS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE LENGTH 2.125 INCHES NOMINAL IN HOLE DIAMETER 0.344 INCHES NOMINAL ALL HOLES IN END ITEM IDENTIFICATION MRAP BUFFALO MK2A2 OVERALL LENGTH 3.375 INCHES NOMINAL IN CROSS-SECTIONAL THICKNESS 0.009 INCHES NOMINAL IN MATERIAL PAPER OVERALL APERTURE WIDTH 0.812 INCHES NOMINAL IN INSIDE CORNER RADIUS 0.125 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 2.750 INCHES NOMINAL ALL HOLES IN OVERALL WIDTH 1.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
ND250187 Interchangeable interchangeable cross-reference
interchangeable
238 Interchangeable interchangeable cross-reference
interchangeable
276293 Interchangeable interchangeable cross-reference
interchangeable
AS63 Interchangeable interchangeable cross-reference
interchangeable
51-10622 Interchangeable interchangeable cross-reference
interchangeable
716-030515 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 243430?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 243430?
243430 is a GASKET.
What parts can replace 243430?
There are 22 known substitutes for 243430: ND250187, 238, 276293 and 19 more. Substitute compatibility should be verified for your specific system.
Is 243430 still available?
243430 is currently cancelled.