PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 24328
24328 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include phase: THREE, length: 2.875 INCHES NOMINAL IN, material: NICKEL ALLOY, control_type: LOCAL OR REMOTE, overall_width: 0.9230 INCHES NOMINAL IN, actuation_method: MAGNETIC. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0573, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24328
NSN: 3110-00-100-0573
FSC: 3110
CAGE: 46717 — PETTIBONE LLC (USA)
SPECIFICATIONS
phaseTHREE
length2.875 INCHES NOMINAL IN
materialNICKEL ALLOY
control_typeLOCAL OR REMOTE
overall_width0.9230 INCHES NOMINAL IN
actuation_methodMAGNETIC
frequency_rating60.0 HERTZ NOMINAL
outside_diameter4.7244 INCHES NOMINAL IN
special_featuresNHA: 1680-01-266-0482
style_designatorCYLINDRICAL
ac_voltage_rating440.0 VOLTS NOMINAL
end_connection_typePLAIN FIRST END
NSN3110-00-100-0573
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 24328 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 4.7244 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.9230 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0312 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER4.7244 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
816-C0V16Interchangeable
interchangeable cross-reference
interchangeable
10938Interchangeable
interchangeable cross-reference
interchangeable
YD-16783Interchangeable
interchangeable cross-reference
interchangeable
NC215ANInterchangeable
interchangeable cross-reference
interchangeable
HC-215AMInterchangeable
interchangeable cross-reference
interchangeable
127262Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24328?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24328?
24328 is a CUP,TAPERED ROLLER BEARING.
What parts can replace 24328?
There are 29 known substitutes for 24328: 816-C0V16, 10938, YD-16783 and 26 more. Substitute compatibility should be verified for your specific system.
Is 24328 still available?
24328 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24328

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026