PartsTable
Technical Data Sheet
Download PDF

2430-1-2 — VALVE,SOLENOID

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

2430-1-2: VALVE,SOLENOID.

The VALVE,SOLENOID is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, flange_shape: RECTANGULAR WITH HOLES ALL ENDS, nominal_width: 1.625 INCHES ALL ENDS IN, nominal_length: 1.625 INCHES ALL ENDS IN, connection_type: FLANGE ALL ENDS, style_designator: STRAIGHT THRU. This part is cataloged in the U.S.

Government catalog under NSN 4810-00-993-3938, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2430-1-2
NSN: 4810-00-993-3938
FSC: 4810 — Valves, Powered
CAGE: 81833 — AEROCONTROLEX GROUP, INC. (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
flange_shapeRECTANGULAR WITH HOLES ALL ENDS
nominal_width1.625 INCHES ALL ENDS IN
nominal_length1.625 INCHES ALL ENDS IN
connection_typeFLANGE ALL ENDS
style_designatorSTRAIGHT THRU
thread_directionRIGHT-HAND ALL ENDS
aperture_diameter0.766 INCHES NOMINAL IN
mounting_positionHORIZONTAL
nominal_thickness0.182 INCHES ALL ENDS IN
bolt_hole_quantity4 ALL ENDS
flange_face_designPLAIN ALL ENDS
NSN4810-00-993-3938
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 2430-1-2 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: NEEDLE OR STEM
•
FLANGE SHAPE: RECTANGULAR WITH HOLES ALL ENDS
•
FLANGE FACE DESIGN: PLAIN ALL ENDS
•
VOLTAGE IN VOLTS AND CURRENT TYPE: 24.0 DC
•
NOMINAL LENGTH: 1.625 INCHES ALL ENDS IN
•
MOUNTING POSITION: HORIZONTAL
•
CONNECTION TYPE: FLANGE ALL ENDS
•
STYLE DESIGNATOR: STRAIGHT THRU
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICENEEDLE OR STEM
FLANGE SHAPERECTANGULAR WITH HOLES ALL ENDS
FLANGE FACE DESIGNPLAIN ALL ENDS
VOLTAGE IN VOLTS AND CURRENT TYPE24.0 DC
NOMINAL LENGTH1.625 INCHES ALL ENDS IN
MOUNTING POSITIONHORIZONTAL
CONNECTION TYPEFLANGE ALL ENDS
STYLE DESIGNATORSTRAIGHT THRU
BOLT HOLE NOMINAL DIAMETER0.221 INCHES ALL ENDS IN
OPERATING PRESSURE110.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SUBSTITUTES & CROSS-REFERENCES 2
2430-1-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
13217E4042Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2430-1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2430-1-2?
2430-1-2 is a VALVE,SOLENOID.
What parts can replace 2430-1-2?
There are 2 known substitutes for 2430-1-2: 2430-1-1, 13217E4042. Substitute compatibility should be verified for your specific system.
What is the NSN for 2430-1-2?
2430-1-2 is cataloged in the U.S. Government catalog under NSN 4810-00-993-3938. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2430-1-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.