PartsTable / COMPONENT / 242B1280
242B1280
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-282-7028, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
242B1280
NSN: 5340-00-282-7028 FSC: 5340 CAGE: 94990 — MOTOROLA INC. DBA INTEGRATED INFORMATION SYSTEMS GROUP (USA)
SPECIFICATIONS
diameter 0.203 INCHES NOMINAL IN material PLASTIC POLYAMIDE NYLON OVERALL overall_width 0.500 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.060 INCHES NOMINAL IN loop_inside_diameter 0.500 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 0.795 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.592 INCHES NOMINAL IN NSN 5340-00-282-7028
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 242B1280
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.592 INCHES NOMINAL IN
• STYLE DESIGNATOR: SINGLE LOOP
• MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
• MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
• LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
• DIAMETER: 0.203 INCHES NOMINAL IN
• DISTANCE FROM LOOP CENTER TO TONGUE END: 0.795 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.592 INCHES NOMINAL IN OVERALL WIDTH 0.500 INCHES NOMINAL IN STYLE DESIGNATOR SINGLE LOOP MATERIAL PLASTIC POLYAMIDE NYLON OVERALL MATERIAL THICKNESS 0.060 INCHES NOMINAL IN LOOP INSIDE DIAMETER 0.500 INCHES NOMINAL IN DIAMETER 0.203 INCHES NOMINAL IN DISTANCE FROM LOOP CENTER TO TONGUE END 0.795 INCHES NOMINAL IN TONGUE HOLE TYPE ROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
BB16024 Interchangeable interchangeable cross-reference
interchangeable
121326 Interchangeable interchangeable cross-reference
interchangeable
C1544 Interchangeable interchangeable cross-reference
interchangeable
T68 Interchangeable interchangeable cross-reference
interchangeable
105315 Interchangeable interchangeable cross-reference
interchangeable
6575334 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 242B1280?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 242B1280?
242B1280 is a CLAMP,LOOP.
What parts can replace 242B1280?
There are 15 known substitutes for 242B1280: BB16024, 121326, C1544 and 12 more. Substitute compatibility should be verified for your specific system.
Is 242B1280 still available?
242B1280 is currently cancelled.
Request a Quote — 242B1280