PartsTable
Technical Data Sheet
Download PDF

242135-4-0442 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

242135-4-0442: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: -50.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, exterior_color: BLUE, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.250 INCHES NOMINAL IN, connection_style: SWIVEL NUT, GASKET SEAL FIRST END. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-355-9013, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
242135-4-0442
NSN: 4720-01-355-9013
FSC: 4720 — Hose and Flexible Tubing
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)
SPECIFICATIONS
temp_rating-50.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
exterior_colorBLUE
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.250 INCHES NOMINAL IN
connection_styleSWIVEL NUT, GASKET SEAL FIRST END
special_featuresHYDRAULIC FLUID IN ACCORDANCE WITH MIL-H-STD-1246,CLEANLINESS LEVEL 200
thread_directionRIGHT-HAND FIRST END
operating_pressure5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure20000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.562 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
NSN4720-01-355-9013
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 242135-4-0442 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 44.250 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -50.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 5.000 INCHES IN
•
CONNECTION STYLE: SWIVEL NUT, GASKET SEAL FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER WRAPPED RUBBER, SYNTHETIC
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH44.250 INCHES NOMINAL OVERALL IN
TEMP RATING-50.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS5.000 INCHES IN
CONNECTION STYLESWIVEL NUT, GASKET SEAL FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER WRAPPED RUBBER, SYNTHETIC
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
OPERATING PRESSURE5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
THREAD DIRECTIONRIGHT-HAND FIRST END
SUBSTITUTES & CROSS-REFERENCES 3
12553678Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
1C01377EEE0442Reference document
Same NSN cross-reference
Reference document — Secondary reference
12553678-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 242135-4-0442?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 242135-4-0442?
242135-4-0442 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 242135-4-0442?
There are 3 known substitutes for 242135-4-0442: 12553678, 1C01377EEE0442, 12553678-8. Substitute compatibility should be verified for your specific system.
What is the NSN for 242135-4-0442?
242135-4-0442 is cataloged in the U.S. Government catalog under NSN 4720-01-355-9013. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 242135-4-0442

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.