PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 242076
242076 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.916 INCHES NOMINAL IN, aperture_diameter: 1.010 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, bolt_circle_diameter: 3.104 INCHES NOMINAL IN, outside_corner_radius: 0.406 INCHES NOMINAL IN, cross-sectional_thickness: 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-833-3652, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
242076
NSN: 5330-00-833-3652
FSC: 5330
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.916 INCHES NOMINAL IN
aperture_diameter1.010 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
bolt_circle_diameter3.104 INCHES NOMINAL IN
outside_corner_radius0.406 INCHES NOMINAL IN
cross-sectional_thickness0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
side_radius_from_gasket_center1.060 INCHES NOMINAL IN
NSN5330-00-833-3652
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 242076 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.406 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 1.060 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 3.104 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.010 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.406 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER1.060 INCHES NOMINAL IN
OVERALL WIDTH3.916 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER3.104 INCHES NOMINAL IN
APERTURE DIAMETER1.010 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
19865Interchangeable
interchangeable cross-reference
interchangeable
3494179Interchangeable
interchangeable cross-reference
interchangeable
40-0000109Interchangeable
interchangeable cross-reference
interchangeable
H2EInterchangeable
interchangeable cross-reference
interchangeable
88-21999Interchangeable
interchangeable cross-reference
interchangeable
Z320PA40AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 242076?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 242076?
242076 is a GASKET.
What parts can replace 242076?
There are 7 known substitutes for 242076: 19865, 3494179, 40-0000109 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 242076?
242076 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-833-3652. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 242076

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026