PartsTable
Technical Data Sheet
PartsTable / MRO / 24195
24195 ✓ Verified by PartsTable
Esselte · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CAPACITOR SET,MATCHED is a Esselte cache protection component designed to preserve data integrity during power loss events in enterprise server and storage controller environments. Key specifications include material: PLASTIC PHENOLIC AND PAPER DIELECTRIC, bore_shape: STRAIGHT, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 0.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8603, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 24195
NSN: 3110-00-144-8603
FSC: 3110
CAGE: 38018 — MANITOWOC ENGINEERING CO DIVISION OF THE MANITOWOC CO INC (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC AND PAPER DIELECTRIC
bore_shapeSTRAIGHT
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length0.125 INCHES NOMINAL IN
bore_diameter20.0 MILLIMETERS NOMINAL MM
overall_width14.0 MILLIMETERS NOMINAL MM
flute_quantity2
load_directionRADIAL
overall_length0.750 INCHES NOMINAL IN
shank_diameter0.013 INCHES NOMINAL IN
NSN3110-00-144-8603
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 24195 · Esselte ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LUBRICATION MATERIAL: GREASE
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
SHIELD QUANTITY: 2
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LUBRICATION MATERIALGREASE
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
SHIELD QUANTITY2
OVERALL OUTSIDE DIAMETER47.0 MILLIMETERS NOMINAL MM
OVERALL WIDTH14.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
600-0101-3/8Interchangeable
interchangeable cross-reference
interchangeable
31274Interchangeable
interchangeable cross-reference
interchangeable
945Interchangeable
interchangeable cross-reference
interchangeable
7036FInterchangeable
interchangeable cross-reference
interchangeable
2148Interchangeable
interchangeable cross-reference
interchangeable
PT265Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24195?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24195?
24195 is a CAPACITOR SET,MATCHED manufactured by Esselte. It is classified as a MRO (MRO_GENERAL).
What parts can replace 24195?
There are 27 known substitutes for 24195: 600-0101-3/8, 31274, 945 and 24 more. Substitute compatibility should be verified for your specific system.
Is 24195 still available?
24195 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24195

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026