PartsTable
Technical Data Sheet
PartsTable / MRO / 24183
24183 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COUPLING,SHAFT,FLEXIBLE is a the manufacturer industrial component. Key specifications include phase: THREE, length: 88.0 MILLIMETERS NOMINAL MM, material: STEEL CORROSION RESISTING OVERALL, duty_cycle: CONTINUOUS, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-210-6204, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 24183
NSN: 5330-00-210-6204
FSC: 5330
CAGE: 0UBG9 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DIV EPD (USA)
SPECIFICATIONS
phaseTHREE
length88.0 MILLIMETERS NOMINAL MM
materialSTEEL CORROSION RESISTING OVERALL
duty_cycleCONTINUOUS
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
ambient_temp50.0 CELSIUS DEGC
control_typeLOCAL OR REMOTE
corner_shapeSQUARE ALL CORNERS
flute_length0.312 INCHES NOMINAL IN
overall_width18.000 INCHES MAXIMUM IN
NSN5330-00-210-6204
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24183 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
T2761Interchangeable
interchangeable cross-reference
interchangeable
QQ-A-200/3Interchangeable
interchangeable cross-reference
interchangeable
121Interchangeable
interchangeable cross-reference
interchangeable
44142Interchangeable
interchangeable cross-reference
interchangeable
C01030Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751 TYCInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24183?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24183?
24183 is a COUPLING,SHAFT,FLEXIBLE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 24183?
There are 13 known substitutes for 24183: T2761, QQ-A-200/3, 121 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 24183?
24183 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-210-6204. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24183

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026