PartsTable
Technical Data Sheet
Download PDF

24124-0013 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

24124-0013: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY CASE, seal_width: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 135.0 FAHRENHEIT DEGF, surface_treatment: ANODIZE CASE, housing_bore_diameter: 0.752 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN, end_item_identification: SUPPORT EQUIPMENT,E-3A AIRCRAFT;AIRCRAFT,CALAXY C-5;AIRCRAFT,EAGLE F-15;AIRCRAFT,THUNDERBOLT II,A-10 A. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-922-4441, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24124-0013
NSN: 5330-00-922-4441
FSC: 5330 — Packing and Gasket Materials
CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY CASE
seal_width0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 135.0 FAHRENHEIT DEGF
surface_treatmentANODIZE CASE
housing_bore_diameter0.752 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN
end_item_identificationSUPPORT EQUIPMENT,E-3A AIRCRAFT;AIRCRAFT,CALAXY C-5;AIRCRAFT,EAGLE F-15;AIRCRAFT,THUNDERBOLT II,A-10 A
accommodated_shaft_diameter0.375 INCHES NOMINAL IN
NSN5330-00-922-4441
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24124-0013 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 135.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 0.752 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 0.375 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE CASE
•
MATERIAL: ALUMINUM ALLOY CASE
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 135.0 FAHRENHEIT DEGF
SEAL WIDTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
HOUSING BORE DIAMETER0.752 INCHES MINIMUM AND 0.756 INCHES MAXIMUM IN
ACCOMMODATED SHAFT DIAMETER0.375 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE CASE
END ITEM IDENTIFICATIONSUPPORT EQUIPMENT,E-3A AIRCRAFT;AIRCRAFT,CALAXY C-5;AIRCRAFT,EAGLE F-15;AIRCRAFT,THUNDERBOLT II,A-10 A
MATERIALALUMINUM ALLOY CASE
SUBSTITUTES & CROSS-REFERENCES 3
899353-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
24069-0013Reference document
Same NSN cross-reference
Reference document — Secondary reference
522656Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 24124-0013?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24124-0013?
24124-0013 is a SEAL,PLAIN ENCASED.
What parts can replace 24124-0013?
There are 3 known substitutes for 24124-0013: 899353-1, 24069-0013, 522656. Substitute compatibility should be verified for your specific system.
What is the NSN for 24124-0013?
24124-0013 is cataloged in the U.S. Government catalog under NSN 5330-00-922-4441. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24124-0013

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.