PartsTable
Technical Data Sheet
Download PDF

241210 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

241210: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075 RETAINER, construction: ONE-PIECE, outside_diameter: 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM IN, retainer_thickness: 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN, packing_inside_diameter: 0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM IN, retainer_inside_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-046-0660, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
241210
NSN: 5330-01-046-0660
NIINs: 010460660, 013438227
FSC: 5330 — Packing and Gasket Materials
CAGE: 77969 — RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. DBA RUBBERCRAFT CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075 RETAINER
constructionONE-PIECE
outside_diameter1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM IN
retainer_thickness0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
packing_inside_diameter0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM IN
retainer_inside_diameter0.750 INCHES NOMINAL IN
material_document_and_classificationQQ-A-283 T6 FED SPEC SINGLE MATERIAL RESPONSE RETAINER
packing_ring_cross-sectional_diameter0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5330-01-046-0660
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 241210 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
PACKING INSIDE DIAMETER: 0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855 CL 1 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-R-6855 CL 3 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-R-6855 CL 2 MIL SPEC 3RD MATERIAL RESPONSE PACKING
•
RETAINER THICKNESS: 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 7075 RETAINER
TECHNICAL CHARACTERISTICS
RETAINER INSIDE DIAMETER0.750 INCHES NOMINAL IN
PACKING INSIDE DIAMETER0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM IN
PACKING RING CROSS-SECTIONAL DIAMETER0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855 CL 1 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-R-6855 CL 3 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-R-6855 CL 2 MIL SPEC 3RD MATERIAL RESPONSE PACKING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-283 T6 FED SPEC SINGLE MATERIAL RESPONSE RETAINER
RETAINER THICKNESS0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 7075 RETAINER
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER CHLOROPRENE CLASS CR PACKING
CONSTRUCTIONONE-PIECE
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 241210?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 241210?
241210 is a SEAL,PLAIN ENCASED.
What is the NSN for 241210?
241210 is cataloged in the U.S. Government catalog under NSN 5330-01-046-0660. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 241210

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.