PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 24120R9 PRT 21584
24120R9 PRT 21584 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, overall_width: 0.375 INCHES NOMINAL IN, overall_length: 1.750 INCHES NOMINAL IN, special_features: 2 HOLES 0.172 IN. DIA,LOCATED 0.188 IN.

FROM EDGE ALONG WIDTH,1.375 IN. CENTER TO CENTER OF HOLES IN, style_designator: RECTANGULAR, surface_treatment: PLASTIC OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-145-1582, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24120R9 PRT 21584
NSN: 5330-01-145-1582
FSC: 5330
CAGE: 59618 — ALLIANCE LAUNDRY SYSTEMS LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
overall_width0.375 INCHES NOMINAL IN
overall_length1.750 INCHES NOMINAL IN
special_features2 HOLES 0.172 IN. DIA,LOCATED 0.188 IN. FROM EDGE ALONG WIDTH,1.375 IN. CENTER TO CENTER OF HOLES IN
style_designatorRECTANGULAR
surface_treatmentPLASTIC OVERALL
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationASTM D1520 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationPASKON 31123 MUP 69,COLOR GREY FSCM 82196 MFR REF SINGLE TREATMENT RESPONSE OVERALL
NSN5330-01-145-1582
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24120R9 PRT 21584 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: PASKON 31123 MUP 69,COLOR GREY FSCM 82196 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D1520 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: PLASTIC OVERALL
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
STYLE DESIGNATOR: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONPASKON 31123 MUP 69,COLOR GREY FSCM 82196 MFR REF SINGLE TREATMENT RESPONSE OVERALL
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D1520 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPLASTIC OVERALL
MATERIALRUBBER SYNTHETIC OVERALL
STYLE DESIGNATORRECTANGULAR
SPECIAL FEATURES2 HOLES 0.172 IN. DIA,LOCATED 0.188 IN. FROM EDGE ALONG WIDTH,1.375 IN. CENTER TO CENTER OF HOLES IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OVERALL LENGTH1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
21584Interchangeable
interchangeable cross-reference
interchangeable
5165256Interchangeable
interchangeable cross-reference
interchangeable
200346Interchangeable
interchangeable cross-reference
interchangeable
2824PC3Interchangeable
interchangeable cross-reference
interchangeable
221384PC2Interchangeable
interchangeable cross-reference
interchangeable
365739PC3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24120R9 PRT 21584?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24120R9 PRT 21584?
24120R9 PRT 21584 is a GASKET.
What parts can replace 24120R9 PRT 21584?
There are 6 known substitutes for 24120R9 PRT 21584: 21584, 5165256, 200346 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 24120R9 PRT 21584?
24120R9 PRT 21584 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-145-1582. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24120R9 PRT 21584

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026