PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2412-8

2412-8 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,BALL,STEERING SHAFT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, point_type: SPLIT, point_angle: 118.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 4.062 INCHES NOMINAL IN, overall_length: 5.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5330-00-450-8009, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2412-8
NSN: 5330-00-450-8009
FSC: 5330
CAGE: 77969 — RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. DBA RUBBERCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeSPLIT
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length4.062 INCHES NOMINAL IN
flute_quantity2
overall_length5.500 INCHES NOMINAL IN
shank_diameter0.438 INCHES NOMINAL IN
special_featuresJOBBERS LG; FRACTIONAL SIZE 7/16
cutting_end_styleGENERAL PURPOSE
surface_treatmentOXIDE FILM OVERALL
nominal_cutting_diameter0.4375 INCHES IN
NSN5330-00-450-8009
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2412-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ANODIZE RETAINER
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE RETAINER
•
MATERIAL: ALUMINUM ALLOY 7075 RETAINER
•
OUTSIDE DIAMETER: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
•
RETAINER THICKNESS: 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
PACKING INSIDE DIAMETER: 0.483 INCHES MINIMUM AND 0.493 INCHES MAXIMUM IN
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS
SURFACE TREATMENTANODIZE RETAINER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE RETAINER
MATERIALALUMINUM ALLOY 7075 RETAINER
OUTSIDE DIAMETER0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
RETAINER THICKNESS0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
PACKING RING CROSS-SECTIONAL DIAMETER0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
PACKING INSIDE DIAMETER0.483 INCHES MINIMUM AND 0.493 INCHES MAXIMUM IN
CONSTRUCTIONONE-PIECE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
AI-104-23-012InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3176200-0005InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
4310PL1380039InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
NAS907InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2111 7/16InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2412-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2412-8?
2412-8 is a BEARING,BALL,STEERING SHAFT.
What parts can replace 2412-8?
There are 5 known substitutes for 2412-8: AI-104-23-012, 3176200-0005, 4310PL1380039 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2412-8?
2412-8 is cataloged in the Federal Logistics Information System under NSN 5330-00-450-8009. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2412-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026