PartsTable
Technical Data Sheet
Download PDF

24118 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

24118: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include phase: THREE, material: STEEL CORROSION RESISTING OVERALL, cone_width: 0.8450 INCHES NOMINAL IN, duty_cycle: CONTINUOUS, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, ambient_temp: 50.0 CELSIUS DEGC. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3536, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24118
NSN: 3110-00-100-3536
NIINs: 001003536, 005277689, 011617601, 012620204
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
phaseTHREE
materialSTEEL CORROSION RESISTING OVERALL
cone_width0.8450 INCHES NOMINAL IN
duty_cycleCONTINUOUS
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
ambient_temp50.0 CELSIUS DEGC
control_typeLOCAL OR REMOTE
bore_diameter1.1875 INCHES NOMINAL IN
overall_width16.000 INCHES NOMINAL IN
overall_height18.000 INCHES NOMINAL IN
overall_length10.250 INCHES NOMINAL IN
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
NSN3110-00-100-3536
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 24118 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
•
CONE WIDTH: 0.8450 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.1875 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.0625 INCHES NOMINAL IN
CONE WIDTH0.8450 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.1875 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
62AX191Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 24118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24118?
24118 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 24118?
There is 1 known substitute for 24118: 62AX191. Substitute compatibility should be verified for your specific system.
What is the NSN for 24118?
24118 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3536. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24118

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.